High Quality for Graphite Electrodes For Steel Making - UHP Grades Graphite Electrodes – Sungraf Detail:
Products Details
The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.
Usage
-
01
An increasing proportion of global steel is made using electric arc furnaces -
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode
Typical properties of UHP graphite electrodes
|
Applicable Furmace Dia |
AC Furnace |
DC Furnace |
|||
|
300-400mm |
450-500mm |
550-600mm |
650-700mm |
||
|
Bulk Density |
g/cm³ |
1.65～1.76 |
1.64～1.75 |
1.64～1.75 |
1.64～1.75 |
|
Specific Resistance |
μΩM |
4.2～6.0 |
4.2～6.0 |
4.2～6.0 |
4.2～5.5 |
|
Elastic Modulus |
Gpa |
7～14 |
7～14 |
7～14 |
7～14 |
|
kgf/mm² |
700～1,400 |
700～1,400 |
700～1,400 |
700～1,400 |
|
|
Flexural Strength |
MPa |
10.5～15 |
10～15 |
10～15 |
10～15 |
|
kgf/cm² |
105～150 |
100〜150 |
100-150 |
100～150 |
|
|
N/cm² |
1,050～1,500 |
1,000～1,500 |
1,000～1,500 |
1,000～1,500 |
|
|
Coefficient Of Thermal |
X10~-6/℃ |
1.0～1.5 |
1.0～1.5 |
1.0～1.5 |
1.0～1.4 |
|
Real Density |
g/cm³ |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
|
Porosity |
% |
20～26 |
20～27 |
20～27 |
20～27 |
|
Ash Content |
% |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.2 |
Typical properties of nipples
| Specifications |
≤φ400 |
φ450-500 |
φ550 |
φ600-700 |
| Specific Resistance (μΩM ) |
≤4.0 |
≤3.8 |
≤3.6 |
≤3.6 |
| Flexural Strength (MPa) |
18-24 |
17-25 |
20-28 |
20-28 |
| astic Modulus (GPa) |
≤18 |
≤18 |
≤18 |
≤18 |
| Bulk Density (g/cm³) |
1.76-1.84 |
1.78-1.84 |
1.79-1.86 |
1.79-1.86 |
| Coefficient Of Thermal Expansion (106/℃) |
0.9-1.3 |
0.9-1.2 |
0.9-1.1 |
0.9-1.1 |
| Ash Content (%) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Current carrying capacity for UHP graphite electrodes
| Current Capacity Of UHP Graphite Electrodes | |||||
| Specifications | Current Capacity(A) | Current Density(A/cm²) | |||
| (inch) | (mm) | AC | DC | AC | DC |
| 12 | 300 | 18,000-32,000 | - | 24-43 | - |
| 14 | 350 | 22,000-39,000 | - | 22-39 | - |
| 16 | 400 | 28,000-47,000 | - | 21-36 | - |
| 18 | 450 | 34,000-55,000 | - | 21-33 | - |
| 20 | 500 | 41,000-63,000 | - | 20-31 | - |
| 22 | 550 | 48,000-70,000 | 65,000-78,000 | 19-28 | 26-32 |
| 24 | 600 | 55,000-80,000 | 75,000-90,000 | 19-27 | 26-31 |
| W | 650 | 69,000-89,000 | 87,000-104,000 | 20-26 | 25-30 |
| 28 | 700 | 80,000-100,000 | 100,000-120,000 | 20-25 | 25-30 |
Product detail pictures:
Related Product Guide:
With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for High Quality for Graphite Electrodes For Steel Making - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: Costa Rica, Spain, India, Our factory insists on the principle of Quality First, Sustainable Development, and takes Honest Business, Mutual Benefits as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the high-quality products and service.Thanks.
By Faithe from Mumbai - 2018.02.04 14:13
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Ruth from Yemen - 2018.06.30 17:29
