Hot Sale for Graphite Electrode Machining - UHP Grades Graphite Electrodes – Sungraf Detail:
Products Details
The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.
Usage
-
01
An increasing proportion of global steel is made using electric arc furnaces -
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode
Typical properties of UHP graphite electrodes
|
Applicable Furmace Dia |
AC Furnace |
DC Furnace |
|||
|
300-400mm |
450-500mm |
550-600mm |
650-700mm |
||
|
Bulk Density |
g/cm³ |
1.65～1.76 |
1.64～1.75 |
1.64～1.75 |
1.64～1.75 |
|
Specific Resistance |
μΩM |
4.2～6.0 |
4.2～6.0 |
4.2～6.0 |
4.2～5.5 |
|
Elastic Modulus |
Gpa |
7～14 |
7～14 |
7～14 |
7～14 |
|
kgf/mm² |
700～1,400 |
700～1,400 |
700～1,400 |
700～1,400 |
|
|
Flexural Strength |
MPa |
10.5～15 |
10～15 |
10～15 |
10～15 |
|
kgf/cm² |
105～150 |
100〜150 |
100-150 |
100～150 |
|
|
N/cm² |
1,050～1,500 |
1,000～1,500 |
1,000～1,500 |
1,000～1,500 |
|
|
Coefficient Of Thermal |
X10~-6/℃ |
1.0～1.5 |
1.0～1.5 |
1.0～1.5 |
1.0～1.4 |
|
Real Density |
g/cm³ |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
|
Porosity |
% |
20～26 |
20～27 |
20～27 |
20～27 |
|
Ash Content |
% |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.2 |
Typical properties of nipples
| Specifications |
≤φ400 |
φ450-500 |
φ550 |
φ600-700 |
| Specific Resistance (μΩM ) |
≤4.0 |
≤3.8 |
≤3.6 |
≤3.6 |
| Flexural Strength (MPa) |
18-24 |
17-25 |
20-28 |
20-28 |
| astic Modulus (GPa) |
≤18 |
≤18 |
≤18 |
≤18 |
| Bulk Density (g/cm³) |
1.76-1.84 |
1.78-1.84 |
1.79-1.86 |
1.79-1.86 |
| Coefficient Of Thermal Expansion (106/℃) |
0.9-1.3 |
0.9-1.2 |
0.9-1.1 |
0.9-1.1 |
| Ash Content (%) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Current carrying capacity for UHP graphite electrodes
| Current Capacity Of UHP Graphite Electrodes | |||||
| Specifications | Current Capacity(A) | Current Density(A/cm²) | |||
| (inch) | (mm) | AC | DC | AC | DC |
| 12 | 300 | 18,000-32,000 | - | 24-43 | - |
| 14 | 350 | 22,000-39,000 | - | 22-39 | - |
| 16 | 400 | 28,000-47,000 | - | 21-36 | - |
| 18 | 450 | 34,000-55,000 | - | 21-33 | - |
| 20 | 500 | 41,000-63,000 | - | 20-31 | - |
| 22 | 550 | 48,000-70,000 | 65,000-78,000 | 19-28 | 26-32 |
| 24 | 600 | 55,000-80,000 | 75,000-90,000 | 19-27 | 26-31 |
| W | 650 | 69,000-89,000 | 87,000-104,000 | 20-26 | 25-30 |
| 28 | 700 | 80,000-100,000 | 100,000-120,000 | 20-25 | 25-30 |
Product detail pictures:
Related Product Guide:
We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental good -grade and high-tech enterprises for Hot Sale for Graphite Electrode Machining - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: Johor, Marseille, Japan, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
By Debby from Switzerland - 2017.05.31 13:26
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Karl from Georgia - 2017.05.21 12:31
